TURFCO T3100, Быстрое руководство по эксплуатации

Страница: 17 / 25

T3000/T3000i Service Quick Tip
Transaxle Oil Change Page 2 of 2
expansion tank. Allow ample time for all air to escape
from the transaxle and continue filling until on the cold
level (FIGURE 3).
8. Purge any excess air from the transaxle. (Perform this
procedure in an open area free of any objects or
bystanders).
a. Start the T3000i engine and disengage the
parking brake
b. Open the bypass valve on the transaxle (Placing
the T3000i in freewheel will open the bypass
valve) (FIGURE 4) and move the speed control
handles in the forward and reverse direction 5
or 6 times.
c. Close the bypass valve (take the T3000i out of
free wheel) and drive the T3000i in the forward
and reverse direction 5 or 6 times.
d. Stop the engine and check the transaxle oil
level. Add oil as required. Repeat steps b
through d until adding oil is not required. When
the T3000i transaxle operates at a normal noise
level and normal forward and reverse speeds it
is considered purged.
Wrap Up
1. Ensure the T3000i runs at normal speeds.
FIGURE 4: Place the T3000i in freewheel to open the transaxle
bypass valve.