TURFCO T3100, Быстрое руководство по эксплуатации

Страница: 12 / 25

T3000/T3000i Service Quick Tip
Parking Brake Adjustment Page 1 of 1
Parking Brake Adjustment
WHAT? The parking break will no longer engage on
the T3000/T3000i (machine still moves when
brake is in the on position (FIGURE 1) .
WHY? Normally occurs when the parking brake is
left on while driving the machine.
Machine Preparation
1. Stand the machine up for easy access to the parking
break adjustment (see T3000/T3000i Service and
Repair Bulletin “Upright Repair Position”)
2. Find the crown nut on the transaxle (FIGURE 2) .
Parking Brake Adjustment
1. Remove the cotter pin and rotate the crown nut
clockwise ½ turn (FIGURE 3) .
2. Turn your parking brake on and off to ensure the brake
feels tight. If it still feels loose move the nut clockwise
to tighten it more. If it is to tight move the nut
counterclockwise to loosen it.
3. Insert the cotter pin back into the crown nut (FIGURE 4) .
Wrap Up
1. With the T3000/T3000i in the operating position
turn it on and ensure that the parking brake works
properly.
FIGURE 1: Parking brake
Approximate time
10 Minutes
FIGURE 2: Crown nut location
FIGURE 3: Tightening the parking brake
FIGURE 4: Reinsert cotter pin