TURFCO 85804 Скачать руководство пользователя

Страница: 19 / 68

DESCRIPTION

Spinner Speed Hydraulic Flow Control:

The hydraulic

speed control varies the

speed of the spinner wheels

by regulating the amount

of hydraulic ﬂow sent to the

hydraulic motors. Increasing

or decreasing the speed of

the spinners does not change

the volume of material being

spread, it only effects the width of the spreading pattern.

The control has settings from 0 to 4 (settings above 4

are locked out). Heavyspread control setting should be

at 3 or less, Lightspread should be at 4.

Spinner Assembly Tilt Control Handle and Locking

Handle:

The tilt of the spinner assembly can be changed

by moving the tilt control handle. Total movement is

approximately 15° degrees. The tilt angle can be changed

up or down to vary or correct the width of spread without

changing the speed of the spinner wheels. The tilt angle

of the assembly can be also be changed to correct for

the difference in hitch heights of different tow vehicles.

The locking handle will keep the spinner assembly

locked into position. During Heavyspread operations,

the spinner assembly should be adjusted to be level with

the ground.

Heavyspread Diverter and Diverter Locking Knob:

The Heavyspread Diverter changes the spread pattern

during Heavyspread operation. The diverter should be in

the lowered position and securely locked with the diverter

locking knob. During light application, the diverter should

be locked in the raised position.

Conveyor Belt Speed Control:

The speed control

regulates the amount of

hydraulic ﬂow to the conveyor

belt motor and regulates the

speed of the conveyor belt.

The speed of conveyor belt

controls the amount of top

dressing material that is moved and discharged thru

the metering gate. Changing the conveyor belt speed

control does not affect the operating speed of the spinner

assembly spinner wheels.

The normal conveyor belt speed control setting during

Heavyspread operation is 3 full turns (counterclockwise)

of the knob from a fully closed (clockwise) position. For

Lightspread operation, set at 3 or more turns.

Metering Gate and Metering Gate Adjusting Handle:

The Metering gate regulates

the amount of top dressing

material released from the

hopper. The metering gate is

manually controlled by moving

the metering gate handle.

The marks on the decal are

for reference only, they do

not represent any measured amounts of top dressing

material. The metering gate opening size is controlled

in two calibrations, Lightspread and Heavyspread. The

metering gate stop pull pin on the side of the metering

gate mount must be pulled out to allow the metering

gate to be moved into the larger opening size for

Heavyspread. If the amount of material being deposited

on the spinner assembly needs to be corrected, adjust

the metering gate opening.

DS85804-04

DS85804-05

��

B C

DS85804-06

Содержание 85804





































































Результаты поиска

Содержание 85804

Отзывы:

Похожие инструкции для 85804

Бренды по названию

Популярные бренды

TURFCO 85804, Руководство оператора

Результаты поиска

Содержание 85804

Отзывы:

Похожие инструкции для 85804

Бренды по названию

Популярные бренды