turck uprox BI10U-M18 Series, Руководство по эксплуатации, Страница: 26 / 32

26
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Troubleshooting
9.2 Setting in SIO mode
Various sensor functions and settable features (see chapt. 4.4.1 and see chapt. 4.4.2) can be
used in SIO mode. The set functions can be evaluated via the switching signals of the particular
output.
9.2.1 Setting the device before initial commissioning
➤ ➤
Set the sensor functions and features via an IO-Link master or IO-Link USB adapter (see chap-
ter 4.5) using a configuration tool.
➤ ➥
The selected settings are saved and are available after the device is mounted in the
installation.
9.2.2 Setting devices after initial commissioning
➤ ➤
Disconnect the device from the controller.
➤ ➤
Set the sensor functions and features via an IO-Link master or IO-Link USB adapter using a
configuration tool.
➤ ➥
The selected settings are saved and are applicable after the device is refitted in the
installation.
10 Troubleshooting
➤ ➤
If possible use the device at another location in the application.
The sensor has a fault if it is still present.
➤ ➤
Take the device out of service and replace it with one of the same type.
If the device operates trouble-free at the different location in the application, the fault is caused
by the application.
➤ ➤
Check the environment of the device for metallic foreign objects in the metal free zones.
➤ ➤
Check the environment of the device for EMC interference sources.
11 Maintenance
The good condition of the sensor connections and cables must be checked regularly.
The devices are maintenance-free, clean dry if required.
12 Repair
The device must not be repaired by the user. The device must be decommissioned if it is faulty.
Observe our return acceptance conditions when returning the device to Turck.
12.1 Returning devices
If a device has to be returned, bear in mind that only devices with a decontamination declara-
tion will be accepted. This is available for download at
http://www.turck.de/static/media/downloads/01_Declaration_of_Decontamination_EN.pdf
and must be completely filled in, and affixed securely and weather-proof to the outside of the
packaging.