turck uprox BI10U-M18 Series, Руководство по эксплуатации, Страница: 19 / 32

19
2016/08
upr
ox® S
ensors with IO
-Link I
nt
er
fac
e
5.2 Mounting rectangular devices
The sensors can be mounted in any position.
A 4-side flush mounting is possible. The switching distance is reduced if the device is mounted
from the rear or with a protrusion.
➤ ➤
Clean the mounting surface and the surrounding area.
➤ ➤
Install the sensor in a fixture (mounting bracket or fixing clamp) if necessary.
➤ ➤
Install the sensor or the mounting fixture at the intended location. Observe the minimum
mounting distances and mounting conditions.
Distance Ni50U-… in rectangular design
D 240 mm
W 105 mm
S 60 mm
G 300 mm
N 30 mm
B 40 mm
Abb. 11: Minimum mounting distances