turck uprox BI10U-M18 Series, Руководство по эксплуатации, Страница: 24 / 32

24
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Operation
8 Operation
8.1 LEDs
The devices are provided with a green and a yellow status LED.
NOTE
The switching state of the device is only indicated via the LEDs in SIO mode. In IO-Link
mode the green LED flashes (1 s on, 0.1 s).
LED indication Meaning
green flashing (1 s on, 0.1 s off) IO-Link communication
green Device is operational
yellow Switching output 1 actuated
yellow flashing (approx. 1 Hz) Switching output 2 actuated
yellow flashing (approx. 4 Hz) Temperature indicator
green/yellow flashing Fault in SIO mode
8.2 Operating devices in IO-Link mode
IO-Link mode provides different sensor functions and adjustable features. The bidirectional
IO-Link communication enables all the parameters to be changed by the controller during com-
missioning as well as during operation.
NOTE
The change of the output configuration is only updated after a voltage reset or after
switching to SIO mode.
8.3 Operating devices in SIO mode
In SIO mode the device operates according to the last setting made in IO-Link mode. Not all
sensor functions and settable features of the device are available for use in SIO mode. The fol-
lowing functions can be set as standard:
■
“One switch point” sensor function
■
Output 1: PNP (NO contact), output 2: PNP (NC contact)
■
Switching distance: 100 %
■
Both LEDs on
9 Setting
The device has two outputs which can be set independently of each other. Output 1 can be
operated either as a switching output or as an interface for IO-Link communication, output 2 is
designed as a switching output.
9.1 Setting via IO-Link
The devices can be parameterized via the IO-Link communication interface within the limits of
their technical specifications (see data sheet). For further information on IO-Link see the IO-Link
commissioning manual (D900634).