turck TN840-Q120L130-H1147 Скачать руководство пользователя страница 5

Страница: 5 / 54

V01.00 | 2018/06

About These Instructions

This manual describes the setup, the functions and use of the product and helps you to operate

the product for its intended use. Read the instructions carefully prior to using the product. This

will prevent the risk of personal injury and damage to property. Keep these instructions safe

during the service life of the product. If the product is passed on, pass on these instructions as

well.

1.1

Target groups

These instructions are written for suitably qualified and trained personnel and must be read by

anyone entrusted with the mounting, commissioning, operation, maintenance, disassembly or

disposal of the device.

1.2

Explanation of symbols

The following symbols are used in these instructions:

DANGER

DANGER indicates an immediate hazardous situation, which, if not avoided, will result

in death or serious injury.

WARNING

WARNING indicates a possible hazardous situation with the risk of death or serious

injury if it is not prevented.

NOTICE

NOTICE indicates a situation that may cause possible damage to property if it is not

prevented.

NOTE

NOTE indicates tips, recommendations and important information. The notes contain

information, particular operating steps that facilitate work and possibly help to avoid

additional work resulting from incorrect procedures.

➤

MANDATORY ACTION

This symbol denotes actions that the user must carry out.

➥

RESULT OF ACTION

This symbol denotes the relevant results of actions and procedures.

1.3

Содержание TN840-Q120L130-H1147























































Результаты поиска

Содержание TN840-Q120L130-H1147

Отзывы:

Похожие инструкции для TN840-Q120L130-H1147

Бренды по названию

Популярные бренды

turck TN840-Q120L130-H1147, Руководство по эксплуатации

Результаты поиска

Содержание TN840-Q120L130-H1147

Отзывы:

Похожие инструкции для TN840-Q120L130-H1147

Бренды по названию

Популярные бренды