turck TN840-Q120L130-H1147, Руководство по эксплуатации

Страница: 39 / 54

39
V01.00 | 2018/06
9.3.4 “Basic setup”
The “Basic Setup” tab is used to set the basic parameters for the read/write heads. All param-
eters and the settable values are written in the DTM.
9.3.5 “Antenna”
The “Antenna” tab is used to set the antenna parameters for the read/write heads. All param-
eters and the settable values are written in the DTM.
9.3.6 “Communication”
The “Communication” tab is used to set the parameters for the configuration of the deBus mes-
sages. All parameters and the settable values are written in the DTM.
9.3.7 “EPC Class1 Gen2”
The “EPC Class1 Gen2” tab is used to set the EPC Class1 Gen2 parameters for the air interface.
The parameters set are used if the read/write head performs an Inventory command. All param-
eters and the settable values are written in the DTM.
9.3.8 “Error Handling” – Selectable parameters
The behavior of the read/write head in response to different events (e.g. LED behavior) can be
set in the “Error Handling” tab. All parameters and the settable values are written in the DTM.
9.3.9 “Event Handling” – Selectable parameters
The behavior of the read/write head in response to errors (e.g. LED behavior) can be set in the
“Event Handling” tab. All parameters and the settable values are written in the DTM.
9.3.10 “Post Read Filter” – Selectable parameters
The parameters for filtering event messages can be set in the “Post Read Filter” tab.
The set filters do not reduce the data traffic on the air interface and are not suitable for multitag
applications with many tags or high passing speeds. All parameters and the settable values are
written in the DTM.
9.3.11 “Signaling” – Selectable parameters
The “Signaling” tab enables the default settings for the LEDs to be edited. All parameters and
the settable values are written in the DTM.