turck TN840-Q120L130-H1147, Руководство по эксплуатации

Страница: 38 / 54

38
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Setting and Parameterization
The following setup windows can be opened in tabs via the main menu:
■
Basic setup
■
Antenna
■
Communication
■
EPC Class1 Gen2
■
Error handling
■
Event handling
■
Post read filter
■
Signaling
9.3.3 Choosing the access level
Three access levels are available for setting the device parameters. Different parameters can be
set depending on the access level.
NOTE
Modifications made in the “Administrator” access level can result in serious changes in
operation. The “Administrator” access level is therefore only available for Turck service
technicians. All relevant settings for the successful parameter setting of an application
are available in the “Advanced” access level.
Access level Description Initial password
Basic Basis access for initial configuration and
commissioning Not required
Advanced Extended access, e.g. for applications Not required
Administrator Administrator access for critical security or wire-
less settings Required
The current access level is displayed in the top right screen area of the DTM.
Fig. 35: Display of the access level