turck TN840-Q120L130-H1147, Руководство по эксплуатации

Страница: 36 / 54

36
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Setting and Parameterization
9.3 Setting read/write heads parameters via the DTM
The functions of the read/write heads can be assigned additional parameters via the param-
eterization function of the DTM.
NOTE
The parameterization function is only available in English. All parameters are written in
the DTM.
The individual read/write heads are available in different variants. When a connection is made
to a connected read/write head, the DTM automatically detects the relevant device and deac-
tivates menu items that are not supported. The connection cannot be established if a different
variant than set in the project tree is connected.
Requirements for extended parameter setting
■
PACTware™ must be installed.
■
The DTM for UHF read/write heads must be installed.
■
The connection between the read/write head and the PC must be established.
■
A project must have been created in PACTware TM .
9.3.1 Starting the extended read/write head parameter setting
➤ ➤
Right-click the device in the project tree.
➤ ➤
Choose “Parameter”

“Parameterization” or “Online parameterization” in the context menu.
Fig. 33: Example: Starting online parameter setting via the context menu