turck TBIL-M1-16DXP, Инструкция по эксплуатации

Страница: 7 / 27

V01.10 | 2020/11
7
3 For Your Safety
The product is designed according to state-of-the-art technology. However, residual risks still
exist. Observe the following warnings and safety notices to prevent damage to persons and
property. Turck accepts no liability for damage caused by failure to observe these warning and
safety notices.
3.1 Intended use
These devices are designed solely for use in industrial areas.
The block module TBIL-M1-16DXP is an IO-Link device and serves as I/O hub between field
devices (sensors and actuators) and the IO-Link master. The hub has 16 I/O channels. Each I/O
channel can be used as either a digital input or output without additional configuration. The
device is designed in IP65/IP67/IP69K and can be mounted directly in the field.
The devices may only be used as described in these instructions. Any other use is not in accord-
ance with the intended use. Turck accepts no liability for any resulting damage.
3.2 General safety notes
n
The device may only be assembled, installed, operated, parameterized and maintained by
professionally-trained personnel.
n
The device may only be used in accordance with applicable national and international regu-
lations, standards and laws.
n
The device only meets the EMC requirements for industrial areas and is not suitable for use
in residential areas.