turck TBIL-M1-16DXP, Инструкция по эксплуатации

Страница: 14 / 27

Parameterizing and Configuring
Parameters
14
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Activate output – 0x42 (66), sub index 0
This parameter activates or deactivates the output function of the digital channel.
Format Length
Byte 2 byte 1 bit per channel
The default values are written in bold .
Value Meaning
0 No Output function deactivated, channel can only be used as input
1 Yes
Output function activated, channel can be used as in- or output
Byte 0 Byte 1
Bit offset Bit offset
7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8
Sub index Sub index
9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8
C8P2
(B) C8P4
(A) C7P2
(B) C7P4
(A) C6P2
(B) C6P4
(A) C5P2
(B) C5P4
(A) C4P2
(B) C4P4
(A) C3P2
(B) C3P4
(A) C2P2
(B) C2P4
(A) C1P2
(B) C1P4
(A)
NOTE
This parameter can also be set for all connectors of the module via the IODD.
Pulse stretching input – 0×43 (67)
This parameter defines the duration of the pulse stretching for digital input edges in multiples
of 10 ms. This allows that even short signals with longer PLC cycle times can be detected.
Format Length
Array of byte 16 byte 1 byte per channel
Default values are shown in bold .
Value Meaning
0 Disabled Pulse stretching deactivated
1 1…255 Pulse stretching (in steps of 10 ms)
Bit offset Bit offset
0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
Sub index Sub index
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
C8P2
(B) C8P4
(A) C7P2
(B) C7P4
(A) C6P2
(B) C6P4
(A) C5P2
(B) C5P4
(A) C4P2
(B) C4P4
(A) C3P2
(B) C3P4
(A) C2P2
(B) C2P4
(A) C1P2
(B) C1P4
(A)
NOTE
This parameter can also be set for all connectors of the module via the IODD.