turck RU CK40 Series, Инструкция по эксплуатации

Страница: 15 / 55

V2.0 | 2021/06
15
5 Installing
NOTE
When using more than one ultrasonic sensor in an application: Avoid the overlap-
ping of sonic cones.
An overlap can occur if two sensors are mounted closer than 2500 mm apart.
The sensors can be mounted in any direction.
„ Clean the mounting surface and its surroundings.
„ When using a mounting aid: Fasten the sensor in the mounting aid.
„ Install the sensor or mounting aid at the intended position.
„
Ensure that the rear plug connector is accessible.
„
Mount the sensor so that the blind zone is clear of any relevant objects (see wave
patterns or technical data).
0
-150
-100
-50
50
100
150
0 20 40 60 80 100 110 120 140 160 200 cm
100x100 mm
ø 27 mm
Fig. 11: Wave pattern