turck 3 IMX12-FI01-1SF-1R-0/24VDC/CC, Руководство по безопасности, Страница: 14 / 24

14
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Operation Instructions
6.3 Parameterization
The user must select the parameters suitable for its safety application.
6.3.1 Parameters
The parameters are set using the switches on the housing side.
This is done with the help of a screwdriver.
If the teach button is pressed for 3 s, the parameters are adopted.
Sensor type
Selection Description
NAMUR NAMUR sensor according to EN 60947-5-6
– 0-signal: sensor not actuated
– 1-signal: sensor actuated
Switch Potential free contact
– 0-signal: switch open
– 1-signal: switch closed
Voltage signal Voltage signal:
– 0-signal 0…3 V
– 1-signal 5…30 V
3-wire PNP 3-wire sensor (positive, negative, positive)
– 0-signal: sensor not actuated (0 V)
– 1-signal: sensor actuated (12 V)
3-wire NPN 3-wire sensor (negative, positive, negative)
– 0-signal: sensor not actuated (12 V)
– 1-signal: sensor actuated (0 V)
Line monitoring (for NAMUR-sensors):
Selection Description
Off Line monitoring is switched off
Wire break and short circuit Line monitoring short circuit and wire break
Parameters:
Switch Parameter State Comment
S1 Line monitoring OFF/ON OFF/ON
S2 Relay mode 2P/4P (2-point)/(4-point)
S3 2P: Under/Overspeed Under/Over Under-/Overspeed
S4 Relay diretion Ninv/inv (not inverted)/(inverted)
S5 Function Relay Loc OFF/ON OFF/ON
S6 Locked switching LocOn/Locoff Locked On/Locked Off
S7 SUD Input [E2]/[E3] Input [E2]/input [E2]
S8 SUD mode Dyn/Stat Dynamic/Static