background image

V01.00 | 2021/10 

About this Document

This safety manual contains all information that is required to operate the device in functional 

safety systems. Read this manual carefully before using the device.

This document addresses only functional safety according to IEC 61508. Other aspects, such as 

intrinsic safety, are not considered.

All instructions must be followed in order to assure functional safety.

Always make sure that this is the latest version of the safety manual at  www.turck.com. The 

English version is considered the definitive document. Care was taken in the production of the 

translations of this document. If there is any uncertainty in its interpretation. Always refer to the 

English version of the safety manual or contact Turck directly.

Scope

This safety manual is valid for the following devices.

ID

Productname

Number of 
Channels

Clamps

Power-Bridge

Intrinsic Safety

100030007

IMX18-DI03-4S-4T1R-S/24VDC

4

screw

no

yes

100030009

IMX18-DI03-4S-4T1R-SPR/24VDC

4

screw

yes

yes

100030008

IMX18-DI03-4S-4T1R-S/24VDC/CC

4

spring type 
terminal

no

yes

100030010

IMX18-DI03-4S-4T1R-SPR/24VDC/CC 4

spring type 
terminal

yes

yes

100030003

IM18-DI03-4S-4T1R-S/24VDC

4

screw

no

no

100030005

IM18-DI03-4S-4T1R-SPR/24VDC

4

screw

yes

no

100030004

IM18-DI03-4S-4T1R-S/24VDC/CC

4

spring type 
terminal

no

no

100030006

IM18-DI03-4S-4T1R-SPR/24VDC/CC

4

spring type 
terminal

yes

no

The following chapters cover the devices

 

IMX18-DI03-4S-4T1R-S

 

IM18-DI03-4S-4T1R-S

Содержание 100030003





















Отзывы: