turck 100000703, Руководство по безопасности

Страница: 9 / 16

9
V01.0 | 2019/09
6.2 Before operation
➤ ➤
Fasten the device to a rail according EN 60715 (TH35) as follows:
Fig. 1: Fasten the device
➤ ➤
Connect cables according to the wiring diagrams in
„7 Connection and Wiring Diagrams“ on
page 12.
➤ ➤
Use cables with Terminal cross section.
ū
rigid: 0.2 mm² to 2.5 mm² or
ū
flexible 0.2 mm² to 2.5 mm²
➤ ➤
When wiring with stranded wires: Fix the wiring ends with ferrules.
Connection via screw terminals:
➤ ➤
Insert the stripped cable ends (7 mm) in the guides of the cable glands.
➤ ➤
Fasten the screws with a screwdriver (max. tightening torque 0.5 Nm) to fix the cable ends.
0.5 Nm
(4.43 LBS-inc)
0.2…2.5 mm
2
(24…13 AWG)
1
2
7 mm
Fig. 2: Connection with screw terminals