Turbosol T20X, Руководство по эксплуатации и обслуживанию

Страница: 48 / 84

5
USE AND OPERATION
48/84
561400 - IS16/09 - EN
5 - USE AND OPERATION
Observe the general safety requirements in § 3.4, those related to transport and use of P.P.E. in § 3.5.4.
5.1 PROCESSING PHASES
Switching on the machine
After completing the positioning phases described in the previous chapter, the operator on the machine starts the same as
described in § 5.10.
Creating the conglomerate
The operator on the machine manually loads the ready-mixed bags or the individual components (such as sand, cement, etc.)
into the tipping mixer. The conglomerate is automatically mixed in the mixer in which the operator also adds the fluids
necessary (water, additives, etc.) to create a mixture suitable to be pumped by the machine.
Transfer of mixture inside the machine
The operator on the machine transfers the mixture from the mixer to the hopper, by mechanically tipping the mixer itself.
Transfer of mixture from the machine to the place of distribution or projection
The worm pump transfers the mixture from the hopper to the conveying pipe, which takes the mixture to the place of distribution
or projection.
Distribution or projection of the mixture
The second operator distributes or projects the mixture. He/she controls the start and stop of the worm pump through a remote
control (pneumatic, electric wire or radio remote control, depending on the type of activity performed).
5.2 ELECTRIC CONTROL BOARD
CONTROLS
Tab. 5-1A
1
EMERGENCY BUTTON
If pressed, it stops the engine.
2
IGNITION KEY
Key insertion/key disconnection/Engine off.
First click: general power supply.
Second click: the glow-plugs pre-heat takes place by holding the key in this
position. The engine can be started when the glow plug indicator light switches
off.
Third click: ignition. Release when engine has started.
3 //
CONTROLS ENABLE BUTTON
Press the button after starting the engine, in order to enable the electric board functions.
The pumping is inhibited when the hopper grid is opened. The mixing is inhibited when the mixer
grid is opened. To restore the function, close the grid and press the button //. The indicator light 10
lights up when the safety devices intervene; the indicator light turns off, after closing the grid and
pressing the button //.
4
PUMPING
Stable position. The pumping is enabled in this position. The pumping is started and stopped by
means of the pneumatic remote control, remote control via cable or radio remote control.
5
PUMPING CHANGE-OVER
Unstable position. While holding the selector in this position, the pumping change-over is enabled;
on releasing the selector the pumping change-over stops.