Turbosol PRO H CL, Инструкция по эксплуатации и техническому обслуживанию

Страница: 8 / 54

8
• The following may appear on the display (a) :
- the time of machine operation given in hours
- the battery voltage (charge control)
- the reference value (from 1 to 100) of the mortar fl ow
control, in bar form and numerical value
- access code setting
- alarm: engine off
- request for servicing.
• Alarms (b)
The machine is fi tted with various sensors to avoid
conditions of malfunction that could cause damage.
• Machine start (c)
Using control switching on and off buttons (ON/OFF),
engine start button (START).
• Mortar pump (e)
The left-hand button (ON/OFF) starts and stops the
agitator in its normal direction of rotation.
The right-hand button (ON) reverses the direction of
rotation of the agitator as long as the key is kept pressed;
when the key is released the agitator returns to the
normal direction of rotation.
The indicator light (STOP) shows that the hopper safety
grid is open or activation of the pneumatic remote control.
The agitator stops when the indicator light is on.
The controls are automatically enabled again when the
indicator light goes out.
• Controls (g) Multifunction buttons, used to:
- adjust the pump fl ow rate
- insert the access code
- initialise the machine after maintenance or servicing.
• Vibrating sieve (h)
Button for switching the vibrating sieve on and off
(optional).
• Water pump (i)
Button for switching the water pump on and off.
• Local/remote controls (n)
The button (LOC/REM) is used to select the controls from
the control panel keypad (local) or from a remote device
(remote control or radio control- optional).
2.3 - DESCRIPTION OF CONTROL PANEL
Control panel
Some indications are given below regarding the controls and indicator lights to be found on the control panel.
a
g
b
c
h
e
i n