manualshive.com logo in svg

Turbolock TL117, Руководство пользователя

Поделиться
Скачать
Turbolock TL117 Скачать руководство пользователя страница 9

TURBOLOCK TL117     9

 

Using the Emergency Power Port

Supply power via the Emergency Power Port on the bottom of the lock. The backlight will flash indicating the lock is receiving power. 

Enter a Passcode and then press ‘ ’ to unlock the door as usual. 

Section 3

Installation (Retrofit)

This section details installation steps needed if you are installing the TL117 on a door with a single cutout already 

made. Replacing an older fixture with a newer one is known as a retrofit. If your door has never had a lock or doorknob 

installed or otherwise has no cutout, please skip to Section 4.

• For easier installation, have another person help to hold the lock.
• Remove all parts of any old lock before installing the TL117. In some cases, the old strike plate and/or box may be used.
• For your convenience, installation instructions are broken into segments. 

Read and follow the instructions for both Pre-Installation and Main 

Installation.

• If your door happens to have two cut-outs, check the clearance between 

the two. Make sure there is enough distance so that you may seal off any 

extra openings.

3.1 Pre-Installation

Part 1 - Disassemble the Lock

The TL117 comes already assembled. Before installation, release the wood 

screws and mounting screws to disassemble the lock into four main parts: 

Outside Assembly x 1, Inside Assembly x 1, Plate x 1, Latch Assembly x 1 

(Fig. 1).

(Fig. 1)

Outside Assembly

Inside Assembly

Latch Assembly

Plate

Содержание TL117





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды