Turbolock TL117, Руководство пользователя

Страница: 26 / 36

26 TURBOLOCK TL117
8.4 Generating Keypad Passcodes
For users without the TurboLock Plus app, the Admin can generate a 4 or 6-digit passcode that users can manually enter on the
TL117 keypad to unlock. This 4 or 6-digit code can be revoked at any time by the Admin. This is a temporary unlock code that can
be used 1-3 times, as assigned by the Admin.
Temporary keypad passcodes are not logged via the Turbolock Plus Unlock Records (see Section
8.3 App Usage
) and should only be used for temporary access. For permanent access, it is highly
recommended to add E-Keys. For instructions, refer to Section 8.5 Managing User Passcodes (E-Keys) .
FIRST TIME USE: Make sure you are within Bluetooth range of the lock (approx. 10m / 30 ft) and the app is connected ( ). Before you
can generate temporary (keypad) passcodes, you MUST tap “Reset Keys” on the app home screen.
Generate Keypad Passcodes in App
Step 1. After opening the app, tap to enter the Send E-Key screen.
Step 2. Tap “Keypad Code” to enter the Send Keypad Code screen.
Step 3. Code Usage limits the number of times a keypad code can be used: 1 for one-time use,
2 for two-time use, and so on. Set the number of uses (Code Usage) for this passcode,
between 1 and 3, then tap Generate (Fig. 26).
You may generate up to 300 temporary (keypad) passcodes (100 for each Code Usage). After this limit is reached, you will not
be able to create any new passcodes until you tap “Reset Keys” ( ) in the app home screen while connected to the lock and
within Bluetooth range.
Fig. 26