Turbolock TL-99, Руководство пользователя

Страница: 10 / 28

10 TurboLock TL - 99
Step2.
Align the Inside Knob on the back of the door making sure to thread
the cable and latch pin through the square opening. Use the 2x
mounting screws to fasten the Outside Knob and Inside Knob to the
door. Make sure both screws are tightened.
(Fig. 5)
Do NOT force the cable’s connector end through any part of the lock.
Damaging the connector may make the lock unusable.
Step3. Add batteries to the battery compartment then slide the cover over
it. Next, plug the lock’s cable into the compartment via the white
connectors.
(Fig. 6)
Step 4. Match the notches on the battery compartment with the screw holes
inside the knob. Holding the compartment in place, place the knob
cover over it. Use the 2x Inside Screws to fasten everything together.
(Fig. 7)
Make sure all screws are tightened.
Step 5.
The lock should now be ready to use. It’s highly recommended to
use the default password and the app to test the lock to make sure it
works before closing the door. See Section 6 for information on the
default admin password. See Section 9 for information on the app.
(Fig. 6)
(Fig. 7)
(Fig. 5)