background image

22     TurboLock TL - 99

Section 11

Maintenance

Proper cleaning and maintenance of your lock ensures it will continue to work as it should. 

• For most cleaning purposes, use water and soft, non-abrasive cloth. 
• If a mess cannot be cleaned with water, apply a gentle cleaner to the cloth and clean. 
• Do not apply any cleaner or detergent directly to any part of the lock. 
• After cleaning with any cleaner, rinse with clean water and dry so as not to leave residue on the lock. 
• The TL-99 meets IP65 water-resistance, meaning it can withstand splashes and contact with water once properly installed. 

However, do not submerge the lock.

• Do not let water and liquids get into the lock’s electric parts or battery compartment.

Section 12

Troubleshooting

Problem 

Possible Cause

Solution(s)

Why can’t I open the door?

Too much time has passed.

Turn the handle to open the door while the lock’s 

backlight is still on.

Your access has been restricted.

If you received a key from the lock’s admin, your access 

may be restricted to certain times of the day. Check with 

your admin regarding these details.

Содержание TL-99





























Отзывы: