Turbolock TL-100 Скачать руководство пользователя страница 33

Страница: 33 / 36

TurboLock TL - 100 33

Problem

Possible Cause

Solution(s)

The lock doesn’t work.

The lock isn’t receiving power.

Ensure the batteries are properly

installed. Remove and reinstall if needed.

The batteries are entirely dead and/or

were not replaced in a timely manner.

Replace the batteries

Use the micro USB port to power the

lock so that the door opens. Replace the

batteries.

I entered the password wrong (at least

3x).

If a password has been entered wrong 3x

in a row, regardless of the entry method,

the lock will go into a 15-minute period of

inactivity where it cannot be used. This

is a security feature designed to prevent

unwanted parties from using the lock.

Wait 15 min. and try again.

Why is does the lock beeping multiple

times?

I forgot my codes.

The codes were not properly recorded.

Perform a reset in order to erase all

passwords. In order to perform a reset,

you must have access to the back of the

door. Once a reset is performed, record

the passwords in memory or a secure

location.

If none of the above information resolves your issue, please visit our website at www.turbolock.com or contact customer service

at 855-850-8031.

Содержание TL-100





































Результаты поиска

Содержание TL-100

Отзывы:

Бренды по названию

Популярные бренды

Turbolock TL-100, Руководство пользователя

Результаты поиска

Содержание TL-100

Отзывы:

Бренды по названию

Популярные бренды