manualshive.com logo in svg

Turbolock TL-100, Руководство пользователя

Поделиться
Скачать
Turbolock TL-100 Скачать руководство пользователя страница 14

14

    

 TurboLock TL - 100

4.1 Pre-Installation

Part 1  Making the Opening

Step 1. 

Using the provided template, mark the locations for the centers of the backset 

and the latch hole.

Step 2. 

Bore a 54mm (about 2” or 2 1/8”) hole on door face, then drill a 25mm (about 1”) 

hole into the edge of the door so that it intersects with the larger hole.

• When drilling the 54mm (about 2” or 2 1/8”) hole, it’s recommended to drill 

from both sides of door to stop the wood from splintering.

• It may be easier to drill the 54mm hole with a hole saw bit (not included).
• It may be easier to drill the 25mm hole with a hole saw bit (not included) 

or a 7/8” spade bit (not included). If using a spade bit, do not drill at high 

speeds as this may tear out extra wood and damage the door.

Part 2  Installing the Latch

Step 1. 

Insert the latch into the hole. Using a pencil, mark a line around the edges of the 

latch to use as a guide. After marking each side, remove the latch. 

(Fig. 15)

Step 2. 

Chisel about 3mm (0.1”) deep or until latch plate sits flush with door edge. 

(Fig. 16)

During chiseling, it’s highly recommended to stop and reinsert the latch every 

once in a while to see if it sits flush. If not, chisel a little more and check 

again. Be careful not to chisel too deep otherwise the lock may not function 

correctly after installation.

2” dia. hole

7/8” to 1” dia. hole

Backset

Latch Hole

Side Hole

(Fig. 15)

(Fig. 16)

Содержание TL-100





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды