12
TurboLock TL - 100
Step 2.
Match the four holes in the silicone backing and the
plate to the four pegs in and around the latch. Make
sure the plate’s bolts face outward then use the 4x
mounting screws to fasten everything together.
(Fig. 9)
Do not over-tighten these screws as this may
damage the lock.
Step 3.
Add the spring and square latch pin into the lock’s
center mechanism.
(Fig. 10a & 10b)
Note, each latch has a different latch pin.
(Fig. 10)
(Fig. 9)
Bolts
Silicone
(Fig. 10a)
(Fig. 11)
(Fig. 10b)
