manualshive.com logo in svg

Turbolock TL-100, Руководство пользователя

Поделиться
Скачать
Turbolock TL-100 Скачать руководство пользователя страница 23

TurboLock TL - 100     23 

Passive Function

After turning the function on, touch any key so that the keypad lights up. The lock will engage allowing you to open the door. No 

password is needed.

• The TL-100 also features a Mute Function. See Section 9.
• If a password has been entered wrong 3x in a row, regardless of the entry method, the lock will go into a 15-minute period 

of inactivity where it cannot be used. This is a security feature designed to prevent unwanted parties from using the lock.

Section 6

Keypad Passwords

6.1  Changing the Admin Password

• 

The Admin Password must always be at least 6 digits long.

• 

The default Admin Password is 

‘123456’

. 

• 

For security, it is highly recommended that you change the Admin Password from the manufacturer default.

Step 1. 

Use the keypad to enter the default (

‘123456’

) or the current Admin Password then enter 

‘#’

.

Step 2. 

Enter 

‘1’

 then enter 

‘#’

. 

Step 3. 

Enter the new Admin Password then press 

‘#’

.

Step 4. 

Re-enter the new Admin Password then press 

‘#’

.

Step 5. 

Wait for the backlight to go out so that the new password successfully saves. 

Step 6. 

If desired, test the new password to confirm the modification was successful.

 The password must be entered while the blue backlight is on. If it goes out, begin again at Step 1.

Содержание TL-100





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды