Assembly Instructions for BTH2610ALP/NG & BTH3210LLP/NG
CAUTION
: While it is possible for one person to assemble this grill, obtain assistance from 2 people when
handling some of the larger, heav ier pieces.
1
Install Grill Head
With the help of your assistants, place the Grill Head into the cutout of your grill island (See Diagram).
NOTE: The grill head is designed to fit into an island of your own design. The island shown in
the diagram is for illustration purposes only. The diagram is not drawn to scale. An island is not
included with the purchase of this grill head. Be sure your island meets the construction guidelines
and clearances as indicated in pages 16 and 17.
12
Connect the Transformer to Power Source and turn on the Grill Lights (for BTH3210LLP/NG Models)
2
An island is shown for illustrative
purposes in the diagram.
Make a hole on your Rear Island Panel for the Transformer Cord. Pull the Transformer Cord out through
the hole, and make sure the cord doesn't touch the ground. (The Rear Island Panel is not included with
the purchase of the Grill Head.)
Plug Transformer Cord into a properly grounded outlet.
Push the Light Switch on the Control Panel to turn on the lights.
Make a hole on your
Rear Island Panel so the
Cord can be pulled out.
