14
Caution
After pressing the power button, if the battery status indicator on the front panel
continues to be red, please refer to the "5.2 Alarm description and processing ".
If the failure cannot be eliminated, please contact the dealer timely.
3.
Use a voltmeter to measure whether the voltage of the circuit breaker
battery access terminal is higher than 42V, and check whether the
voltage polarity is consistent with the inverter input polarity. If the circuit
breaker battery input terminal has a voltage output and is greater than
42V, then the battery begun to work normally.
4.
After confirming that the battery output voltage and polarity are correct,
turn on the inverter, close the circuit breaker.
5.
Check if the indicator of the inverter and battery connection
(communication indicator and battery access status indicator) is normal.
If it is normal, successfully complete the connection between the battery
and the inverter. If the indicator light is abnormal, please refer to the
inverter manual for the cause or contact the dealer.
6.
Battery modules can be connected in parallel up to 40 units.
