Tunstall Connect America CEL450, Руководство по подключению и инструкция пользователя

Страница: 9 / 20

Page 9 of 20
Installation and User Guide
announce ‘personal trigger’ or ‘fall detector’ depending on the Help Activator supplied
to you.
Help Activator Range Test mode will automatically exit 2 minutes after the last press
of the help activator. You can also exit programming mode at any time by pressing
the green RESET button on the home console unit. After the range has been tested,
please be sure to send a test signal to the monitoring center using your help activator(s).
NOTE: It is important to test help activator(s) in all the areas of your home, including the
bathroom, basement and garage, as environmental conditions such as furnishings, building
structure etc may affect the range. An emergency call will NOT be initiated if the help activator is
pressed whilst out of range of the home console unit.
Step 4 – Ready to use
Once successfully tested, the CEL450 home console is ready for use.
Optional Wall mounting
Warning: Holes should only be drilled by a competent person and after confi rming that
there are no hidden cables or pipes at the location.
If you prefer that your home console be mounted on the wall, please follow these
directions. First, decide where you want to position the home console. Note that it
should be within 6 feet of the AC power and cellular antenna location with suitable
signal strength. Drill two holes 5.9” (149mm) apart, fi rmly attach screws (not
supplied) and then locate the wall mounting points on the home console with the
screws.
NOTE: The diagram above is for illustrative purposes only and should not be used as a measuring
tool (i.e. it is not drawn to scale).
Warning: Holes should only be drilled by a competent person and after confi rming that
there are no hidden cables or pipes at the location.