Status: 13.08.2019
Translation of the original Installation and operating instructions nnn
TÜNKERS Maschinenbau GmbH
9
Appendix
9.1
Declaration of installation
Declaration of incorporation
In line with the Machinery Directive 2006/42/EC, Appendix II A
The manufacturer
TÜNKERS Maschinenbau GmbH
Am Rosenkothen 4-12
D-40880 Ratingen, Germany
+49 (0) 2102/4517-0
of the partially completed machine
hereby declares:
General designation
Retractable Locating and Expanding Pin SDZ 40 F
Function
Clamping, holding, locking and releasing of fixtures/com-
ponents, e.g. on turntables.
Type designation
Retractable Locating and Expanding Pin SDZ 40 F
Serial number
-
Product name
Retractable Locating and Expanding Pin SDZ 40 F
Year of construction
2018
the following basic health and safety requirements in line with appendix I of the machine directive
have been applied and adhered to:
Annex I, Article 1.1.2, 1.1.3, 1.1.5, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.5.4, 1.5.8, 1.6.1, 1.6.3, 1.7.1, 1.7.3
und 1.7.4
The partially completed machine also complies with all provisions of the EMC Directive 2014/30/EU.
Specific technical documentation was created in line with Annex VII Part B.
All relevant information about the partially completed machine will be provided on reasoned request
by the appropriate national authority.
Commissioning is prohibited until it has been established that - where applicable - the machine into
which the partially completed machine above is to be installed complies with the provisions of the
Machinery Directive 2006/42/EC.
Authorised representative for composing the technical documentation:
TÜNKERS Maschinenbau GmbH, Am Rosenkothen 4-12, D-40880 Ratingen, Germany, Tel.: +49 (0)
2102/4517-0
Ratingen
Place/date:
Olaf Tünkers
Managing Director
