9
10
1c.
Tighten the nuts and bolts on each end
with a pair of 13mm wenchs to secure the
head and foot frames.
2a.
Locate the two mattress stop mounting bolts at ends of the bed
surface.
2b.
Remove the top 2 sets of nuts and bolts on each end of the
headframe on the receptacle holders, set the nut and bolts on the
side.
2c.
Assemble the bolt, washer, and moon shape spacer in order
according to the diagram below, and attach the mattress stop bar
onto the frame surface.
2.
The matterss stop bars are shipped cable tie on to both side of
the frame, remove them to install.
(Below illustration shows headframe on the right and footframe on
the left)
