background image

LIMITED WARRANTY

LIMITED WARRANTY

The warranty below has been drafted to comply with Federal Law applicable
to products manufactured after July 4, 1975.  This warranty is extended only
to the original purchaser/consumer (or dealer non-consumer who does not
buy for resale).

Tuffcare

®

warrants that it’s Centrury Bariatric Max beds will be free from

defective workmanship and materials for a period of three (3) years following
the date of original manufacture with the following exceptions: All welds are
warranted for the life of the bed.  Electronics on the beds are warranted for
one (1) year.  The warranty period commences on the original manufacture
date.  If within such warranty period any such product proven to Tuffcare

®

satisfaction to be defective, such product will be repaired or replaced at
Tuffcare

®

option.

Tuffcare

®

sole obligation and your exclusive remedy under this warranty

shall be limited to such repair and/or replacement. This warranty does not
include any labor charges incurred in replacement parts installation. Freight
charges to the factory are at the expense of the consumer or seller. Return
freight charges will be prepaid by Tuffcare

®

. For warranty service, please

contact the authorized dealer from whom you purchased your Tuffcare

®

products. In the event that you do not receive satisfactory warranty service,
please write directly to Tuffcare

®

: 4977 La Palma Ave, Anaheim, California,

92807. DO NOT RETURN PRODUCTS WITHOUT PRIOR AUTHORIZATION.

LIMITATIONS AND EXCLUSIONS: The foregoing warranty shall not apply
to products subjected to negligence, abuse, misuse, improper operation,
improper maintenance, improper storage or damages beyond Tuffcare

®

control. The evaluation will be solely determined by Tuffcare

®

. The warranty

shall not apply to problems arising from normal wear, or failure to follow
instructions, or if parts are not manufactured by Tuffcare

®

, or do not comply

with original equipment specifications that are added to Tuffcare

®

product.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE AND SHALL NOT EXTEND BEYOND THE DURATION OF THE
EXPRESS WARRANTY PROVIDED HEREIN. TUFFCARE

®

SHALL NOT

BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES WHATSOEVER.

This warranty gives you specific rights and you may also have other legal
rights which vary from state to state. Some states do not allow the exclusion
or limitations of incidental or consequential damage, or limitation on how
long an implied warranty

20

19

MAINTENANCE

MAINTENANCE

CLEANING THE BED

• The Bed can be cleaned with non-abrasive cleaners.
• Inspect and clear casters of debris, making sure that

the wheels roll, and they swivels smoothly.

DETECTING WEAR AND DAMAGE

• Check monthly that all screws are tight and have not 

loosened.

• Check monthly for damaged or exposed wires on the

electrical components.

• Inspect monthly for signs of cracking, fraying, or any 

deterioration.

• Contact your equipment provider for replacement of

any defective parts immediately and ensure that the
bed is not used until repair job is completed.

LUBRICATING THE BED

•  A light grease lubricant may be applied to the ball

bearing and swivel of the casters every three months.

PERFORMING REGULAR MAINTENANCE

•  Regular maintenance of the bed and accessories are

required to ensure proper operation. The casters and 

axle bolts are to be checked for proper tightness.

Содержание Century Max T5200












Отзывы: