15
NOTE:
The manifold inlet is in the base of the
BBQ at the front on the right-hand side. Manifold
diameter is 20mm square tube.
The GTR Roasting Hood if fitted is 320mm high
from the top of the Cooking Surface when shut
and 410mm high when open.
The back of the GTR Roasting Hood is flush with
the back of the BBQ when open and does
protrude past the back of the Cabinet Trolley at
all when opening or shutting.
The optional Flat Lid/ Weather Cover is 35mm
high shut and 580mm high open from the
Cooking Surface of the BBQ.
Minimum Side Clearance Allow 200mm
Minimum Rear Clearance Allow 200mm
Rear Wall 100mm
Side Walls 100mm
Above BBQ with out Roasting Hood 800mm
Above BBQ from top of Roasting Hood 800mm
MINIMUM CLEARANCES SURROUNDING BBQ
BODY TO COMBUSTIBLE MATERIALS ARE AS
FOLLOWS
MINIMUM CLEARANCES ABOVE COOKING
SURFACE OF BBQ TO COMBUSTIBLE WALLS
If the BBQ is installed into a tucker GTR zero
clearance cabinet trolley the clearances to
combustibles are zero at the rear and either side
of the BBQ body.
NOTE:
The wall surfaces above the BBQ cooking
surface at the rear and on either side of the BBQ
must be non-combustible material otherwise
a clearance of 100mm to combustibles is
required.
