manualshive.com logo in svg

Tuchel Kompakt HD 400 Series, Руководство по эксплуатации

Поделиться
Скачать
Tuchel Kompakt HD 400 Series Скачать руководство пользователя страница 22

Safety

.  Safety notices for carrying out service, 

inspection and installation work

The operator must ensure that all service, inspection and 

assembly work is carried out by authorised and qualiied 

personnel that has suficiently informed itself through 

detailed study of the operating manual.

Carry out maintenance and modiications on the Kompakt 

sweeping machine only if the power take-off / hydraulic 
drive is switched off. Pull the ignition key and secure the 
carrier vehicle against unintended restart and movement!

When carrying out maintenance on the lifted device, 
always secure it with suitable supports.

Use suitable tools and gloves when exchanging the 
sweeping drum and sweeping rail.

Lawfully dispose of oil and grease.

Directly after inishing work, all safety and protection 

equipment must be reattached or made functional.

Before restarting, the points listed in the sections on start-
up must be adhered to.

.9  Unauthorised conversion and spare parts 

manufacturing

Conversion of or changes to the machine are only 
permitted after consultation with the manufacturer. 
Original spare parts and accessories authorised by the 
manufacturer provide safety. The use of other parts 
invalidates the liability for the consequences thereof.

.0   Modes of operation that are not 

permitted

The operational safety of the machine supplied is only 
warranted if used as intended according to Chapter 1 - 

General – of the operating manual. The limits speciied 

in the data sheets must not be exceeded under any 
circumstances.

Содержание Kompakt HD 400 Series

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды