manualshive.com logo in svg

Tubeline TL60ECV, Руководство оператора

Поделиться
Скачать
Tubeline TL60ECV Скачать руководство пользователя страница 44

TL60ECV

 - 

Section 12: Option - Power Drive 12-4

•  DF

 port to left hydraulic motor fitting closest to wheel via shorter hose with 90° female JIC end.

•  DR

 port to right hydraulic motor fitting closest to wheel via longer hose with 90° female JIC end.

• 

Connect left and right hydraulic motors using hose with straight JIC fitting ends.

Power Drive Operation

Enable powerdrive on control screen.Parameters page, as seen on 

pg.6-4

.

Powerdrive is only available when machine is in Auto Wrap Mode.
Press button on control screen to enable the Power Drive option, as shown below. 

NOTE:

 This will deactivate after 30 seconds of inactivity.

Push toggle knob towards front of machine to drive the machine forward. Push the toggle knob 

towards the rear of machine to reverse the machine as desired.
Releasing knob will return it to neutral position and stop the bale wrapper from travelling further.

Fig.4.

Содержание TL60ECV

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды