TubeDepot JTM45+ Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 45

TubeDepot JTM45+ Скачать руководство пользователя страница 6

As with any construction project, there are certain recommended tools and supplies. The
following are the tools and supplies NOT provided with the kit but are needed for completion.
These are expected to be provided by the builder.

TubeDepot.com

The following is our recommended list:

part number

Phillips screwdriver, #1 and #2

Slip joint pliers
Needle nose pliers

Wire cutters, diagonal

Wire strippers, for 18 and 20 awg wire

Electric Drill (cordless recommended)
Drill bit, 1/8” - AC receptacle installation; turret board wire routing

Drill bit, 5/32” - turret board mounting

Drill bit, 9/32” - Chassis mounting in cabinet
Drill bit, 5/16” - inset nut installation into chassis
Drill bit, 7/16” - impedance selector installation
Drill bit, 1/4” - shock mounted tube socket mounting holes
Countersink bit
Masking tape, 2” or 3”
Ruler or scale, 12” w/ 1/16” markings
Permanent marker, fine tip
Soldering iron, 25W – 40W (35W recommended)

Solder, electronics safe (60/40 w/ rosin core recommended)

TS-24-6040-0027

Flux, electronic – liquid or paste (must be safe for electronic work)

TS-83-1000-0186

De-soldering pump / solder extractor

Solder wick or desoldering braid

Sponge or soldering iron tip cleaner

The following are tools that really nice to have on hand:

Soldering station w/ temperature control

Multimeter w/ DC range of at least 500V

Variable AC supply (Variac® style)
Current Limiting AC source (dim bulb tester) – self built
Needle nose pliers – small size, for electronics work

Wire cutters, diagonal – small size, for electronics work

Center punch – an automatic center punch is great
Nutdrivers - 5/16”, 11/32”, 7/16”, 1/2”
Square, 9”
Scratch Awl
De-burring tool

Fingernail polish (for holding nuts and screws in place)
Step drill bit (1/8” - 1/2”)
Orange wood stick – for moving components and wires into place

2

Tools and Supplies

2 TubeDepot.com

«
...
4
5
6
7
8
...
»

Содержание JTM45+














































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды