Tube-Line NITRO 950, Руководство оператора

Страница: 18 / 75

Nitro 950 -
Section 2 - Operation
2-3
Operation Safety
1. Please remember it is important that you read
and heed the safety signs on the Nitro Manure
Spreader. Clean or replace all safety signs if they
cannot be clearly read and understood. They
are there for your safety, as well as the safety of
others. The safe use of this machine is strictly up
to YOU, the operator.
2. All things with moving parts are potentially
hazardous. There is no substitute for a cautious,
safe-minded operator who recognizes potential
hazards and follows reasonable safety practices.
The manufacturer has designed the Nitro Manure
Spreader to be used with all its safety equipment
properly attached, to minimize the chance of
accidents. Study
this manual to make sure you have all safety
equipment attached.
&ORVHDQGVHFXUHDOOJXDUGVGHÀHFWRUVDQG
shields before starting and operating.
4. Read and understand the Owner and
Operator’s Manual before starting. Review safety
instructions annually.
5. Personal protection equipment including
safety glasses, safety shoes and gloves are
recommended during operation, adjustment,
maintaining or repairing. Do not allow long hair,
ORRVH¿WWLQJFORWKLQJRUMHZHOU\WREHDURXQG
moving parts.
6. Never place any part of your body where
it could be in danger if movement should
occur during assembly, installation, operation,
maintenance, repairing, unplugging or moving.
7. Turn tractor off, remove ignition key and
place in your pocket, and wait for moving parts
to stop before servicing, adjusting, repairing or
unplugging.
8. Never use alcohol or drugs which can hinder
alertness or coordination while operating
this equipment. Consult your doctor about
operating this machine while taking prescription
medications.
9. Do not allow riders on the Nitro Manure
Spreader at any time. There is no safe place for
any riders even for troubleshooting issues.
10. Never allow children or unauthorized people
to operate or be around the Nitro Manure
Spreader.
11. Keep the working area clear of people and
other machines to prevent accidents.
12. Do not exceed a safe travelling speed when
transporting.
13. Always use extra caution when turning
around corners or in tight areas.
14. The upright beaters on the Nitro can maim or
kill. Always check for bystanders before engaging
the PTO.
Pre-operation Checklist
It is important for both personal safety and
maintaining the good mechanical condition of the
machine that this pre-operational checklist be
followed. Before operating the machine and each
time thereafter, the following areas should be
checked off:
1. Lubricate the machine completely. Refer to
“Service” in the Service & Maintenance section of
this manual.
2. Use only a tractor of adequate power (see
PTO / Horsepower Requirements on
page 2-1 )
and weight to handle the spreader.
3. Ensure that the machine is properly attached
to the tractor using a drawbar pin with provisions
for a mechanical retainer. Make sure that a
retainer is installed.
4. Ensure that the safety chain on the hitch is
installed.
&KHFNWLUHVDQGHQVXUHWKDWWKH\DUHLQÀDWHGWR
WKHVSHFL¿HGSUHVVXUHSVLN3D
6. Check oil level in the tractor hydraulic
reservoir. Top up as required.