Tube-Line NITRO 950, Руководство оператора

Страница: 12 / 75

Nitro 950 -
Section 1 - Safety
1-5
Safety Training
1. Safety is the primary concern in the design and
manufacture of our products. Unfortunately, our
efforts to provide safe equipment can be wiped
out by a single careless act of an operator or
bystander.
,QDGGLWLRQWRWKHGHVLJQDQGFRQ¿JXUDWLRQ
of equipment, hazard control and accident
prevention are dependent upon the awareness,
concern, prudence and proper training
of personnel involved in the operation,
transportation, maintenance and storage of this
equipment.
3. It has been said, “The best safety feature is
an informed, careful operator.” We ask that you
to be that kind of operator. It is the operator’s
responsibility to read and understand ALL safety
instructions in the manual and follow them.
Accidents can be avoided.
4. Working with unfamiliar equipment can lead
to careless injuries. Read this manual before
assembly or use, to acquaint yourself with the
machine. If this machine is used by any person
other than yourself, or is loaned or rented, it is the
machine owner’s responsibility to make certain
that the operator, prior to using:
• Reads and understands the operator’s manual
• Is instructed in safe and proper use.
5. Know your controls and how to stop the engine
and machine quickly in an emergency.
6. Train all new personnel and review instructions
frequently with existing workers. Be certain only
a properly trained and physically able person
will use the machinery. A person who has not
read and understood all the safety instructions
LVQRWTXDOL¿HGWRXVHWKHPDFKLQH$QXQWUDLQHG
operator exposes himself and bystanders to
possible serious injury or death. If the elderly are
assisting with the work, their physical limitations
need to be recognized and accommodated.
THINK SAFETY! WORK SAFELY!
Safety Signs
1. Keep safety signs clean and legible at all
times.
2. Replace safety signs that are missing or have
become illegible.
3. Replaced parts that displayed a safety sign
should also display the current sign.
4. Safety signs displayed in Safety Sign Loca-
WLRQVHDFKKDYHDVLJQL¿FDQWSXUSRVHDQGQHHG
to be cleaned or replaced when necessary.
5. Safety signs are available from your authorized
distributor or dealer parts department or from the
manufacturer.
How to Install Safety Signs
1. Be sure that the installation area is clean and
dry.
2. Be sure the temperature is above 10 C (50 F).
3. Determine the exact position of the new safety
sign before removing the paper backing.
$OLJQWKHVLJQRYHUWKHVSHFL¿FDUHDFDUHIXOO\
press the sign on, slowly peeling away the
backing paper while smoothing the sign in place.
5. Small air pockets can be pierced with a pin
and smoothed out using a piece of sign backing
paper.