13
CAUTION
● Always make sure that the Seawolf Ocean Master, controller, FPV Monitor and sports camera are fully charged
b
efore launch.
● Always use new 6 x AA batteries for the controller.
● Check all control surface, control throws, all screws and pumps if they are working correctly before the Seawolf goes into
the water.
● Place the Seawolf in the water, check any bubbles released from the Seawolf. When the water bubbles observed, retrieve
the Seawolf Ocean Master IMMEDIATELY.
● The water ballast should be full in less than 1 minute. If the Seawolf Ocean Master failed for static diving, please retrieve
the Seawolf Ocean Master and inspect the problem at once.
● If Seawolf Ocean Master slows down, DO NOT activate pump or dive into water. Please recharge the Seawolf Ocean
Master.
● DO NOT DROP the Seawolf Ocean Master from height.
● DO NOT operate the Seawolf Ocean Master in the hot water< Hot Spring> ! The water temperature should not exceed
room temperature.
● The operation depth limitation for Seawolf Ocean Master is 60 meters for the structure and 40 meters for the system. DO
NOT connect the cable for more than 40 meters.
● During operation, the cable should be loose and free from tension at all times for the best result. Avoid cable twisted itself
as well.
● Please be cautious and aware the underwater objects such as rocks or fish lines. Avoid tangling with other objects.
● ALWAYS operate Seawolf Ocean Master in clean water for better view experience. Avoid murky water environment.
● Seawolf Ocean Master is delicate equipment. Be gentle when transport with carrying case.
● When using carrying case, please make sure the suitcase is closed properly and completely.
On the main control PCB unit, there are 3 LED lights are designed to show the current status of the Seawolf submarine. You can
observe the light and refer to the following chart to get the light information.
LED INDICATION LIGHT
The auto protecting system is integrated on the main PCB. When the system detects signal lost, low battery or hull leak (water
in the inner hull), the pump will drain water out from the ballast continuously & automatically.
AUTO PROTECTING SYSTEM
Red Light On (Continuous)
Normal Operating
Light Sign
Light Sign
Seawolf Status
Seawolf Status
Low Battery
Tx Signal Lost
Water Inside Hull
Red Light Flash
(Y)
(G)
(R)
(Y)
(G)
(R)
(Y)
(G)
(R)
(Y)
(G)
(R)
Water Pump On
Ballast Bag Filling
Diving
Water Pump On
Ballast Bag Emptied
Surface
Yellow Light On--
Green Light On--
