9
Switch on by turning clockwise.
Switch off by turning counterclockwise.
User may refer to page 4 of the radio control and movement. It
is recommended to familiar with the controls once it dives then
you can only see the monitor to control your Sub. Image you
are sitting in the cabin and control the sub. Check all control
surfaces and propeller are in neural position and functions
correctly without any interruption.
1. Connect the Seawolf Ocean Master and controller with
the cable (Included). Makes sure that all the trims on the
controller are in neutral positions.Hand screws the cable
connectors firmly and creates a proper seal.
Reinforce the connector portion at sub end with the steel
wire. Secure the wire properly, make sure the connector
portion looks like a " Bow " style.
2. Lock the FPV monitor firmly on the mount with a hand screw.
Screen shade is available when operate the Seawolf Ocean
Master under the sun. Connect the FPV monitor to the
controller with the cable included.
3. Turn the controller power ON. / Turn the FPV monitor ON.
Make sure the sports camera power is on.
ON
ON
Finally turn on the Ocean Master. The main power switch is
located at the bottom of the front flange. From the bottom view,
the right switch controls the main power while the left switch is
unused.
5. Make sure that the monitor is receiving AV signals. The
live video feed from the camera should appear on the FPV
monitor.
CONNECTION
ON
OFF
UPSIDE DOWN
