37
FTE-7000A User's Guide Rev A 5/2014
Chapter 10 Video Scope
Quick Save
Press the menu button, use the left or right buttons to highlight the quick save icon and press the select button
to store a
fi
le image of the scope screen in the
fi
le folder within an active project. Scope
fi
les will be preceded
by a target icon.
Project Management
To open project management, press the menu button, use the left or right buttons to highlight the project
management folder icon and press select. Use the project management folder to open the project that the
scope images are to be stored. When entering the video scope function, the active folder will be the one
lase used in the OTDR or LTS. For more information about the project management system, please refer to
Chapter 8 of this guide.
File Management
To open
fi
le management, press the menu button, use the left or right buttons to highlight the
fi
le management
icon and press select. Use File management to view a list of saved
fi
les or to open a stored image.
fi
le types
are identi
fi
ed by a preceding icon. Trace
fi
les are indicated by a trace icon, LTS
fi
le by an LTS icon and scope
fi
les are preceded by scope (target) icon
Help
Press the menu button, use the left and right buttons to highlight the help icon and press select to view the help
information.
10.4 Video Scope Operation Icon Menu
The following functions are only available for use when the the video scope is in live scan mode.
Grading Rings Icon
Used to turn on and off the rings that indicate the IEC61300-3-35 grading zones.
by entering the menu mode with the menu button, use the LRUD buttons to highlight the pass/fail grading rings
overlay icon and press the select button. Exit the menu mode and use the LRUD buttons to center the image
in the rings. Use the appropriate table from below to grade the connector end face. 2, 3, 5 and 10 micron
contaminant examples are displayed just below the connect image on the video scope display.
Pass/Fail Label Icon
Used to turn cycle through pass, fail or no grading (off) of the pass/fail indicator. To set the pass/fail indicator,
press the menu button, use the left or right buttons to highlight the pass/fail icon and press select to cycle
through the pass/fail states.
