- 29 -
“WIFI-EN”:WIFI On/Off Setting,Press [OK] for choosing;
“Encr-EN”: WIFI encryption ON/Off Setting,press [OK] for choosing;
“Au-Mode”: WIFI Authentication mode setting,Please choose same one with your router,
“Enc-Type”: WIFI Encryption type setting,Please choose the one same with your router,
“IP”\“Mask”\“Gateway”:WIFI IP/Mask/Gateway setting
“SSID”: Input Your WIFI SSID,
“PWD”: Same with your WIFI password,
**** According to the specific configuration of WIFI network environment, please pay attention to
check the accuracy of the characters and the IP address ****
**** IP address set by WIFI and local network can not be in the same network segment ****
5.6.5 IPC Setup
Through IP Setup, Maximum configuration can support 1CH 2MP IPC real time transfer data and video
recording.
“Enable”: IPC Access On/Off Setting, For now only support 1CH IPC video&Audio input;
“Protocol”: Select each manufacturer camera ONVIF protocol, support mass customized production;
Type1: HIKVISION. When choose HIKVISION IPC PTZ , need to choose Type1; when choose HI
KVISION IPC camera, need to choose Type2;
Type2: XiongMai. Type3 and Type4 are for test custom reserved.
After choosing Protocol, then directly input Camera IP, UserName and UserPWD has been set
based on RTSP protocol, DO NOT modify it into login password.
**** When need connect IPC, the connection type should be change into Peripherial ****
**** the IP address of IPC should be the same segment with local IP
****
