- 24 -
"Alarm pre-recorded": pre-recorded alarm recording time of 0-60 seconds to setup, press number keys
to setup.
"Alarm delay": alarm delay recording time, 120-300 seconds to set up, press number keys to setup.
"Camera Type ": Can switch the status of standard definition , high definition or mixed camera input.
Attention :
If the camera type and DVR setting mode(AHD HD/Analog/Mixture) don’t match, then it will show
“video lost”, In Mixture mode, 1,2CHANNEL is AHD high definition input, 3,4CHANNEL is analog
standard definition input;
5.5.2 Mirror Record
When there is dual storage in device, you can choose one as a mirrored video memory. And setup the
recording parameters.
5.5.3 Main Stream
This manual is to setup the code stream and definition of video channel.
"Enable": open or close the channel of pre-recording function, press [OK] key to select.
"Resolution": CIF, HD1, D1 and 720P resolution for choosing, press [OK] key to select.
"FPS": 1-25 frame (P standard), 1-30 frame (N standard) channel recording frame rate for choosing.
"Image quality" setup video quality under different resolution, 4-speed adjustable.
"Audio" setup the audio recording on or off.
**** According to the storage space and quality requirements, the resolution of each channel and stream
can be configured individually
****
** The setting of the 5th channel code stream need pre-allocate in the IP camera **
