- 41 -
6. Device Installation
6.1 Power Cable Connection
Attention
1.
The recorder is DC power supply; please attention the positive and negative polar.
2.
The voltage is 7V~48V.Do not insert voltage that beyond this range. Under low voltage the recorder
doesn’t work, under high voltage will be harm to the recorder.
3.
Please make sure the recorder is connect with the car power directly. Do not connect with the generator,
the instantaneous voltage will harm to the recorder.
4.
The
initial power will beyond 30W when the DVR connect with the Camera (the consumed power is
different due to the connect with different device, the power supply must beyond 30W.
5.
The power cables must can stand beyond 60W.(For example, when
the output voltage of car is 12V,the power cables must can bear 5A or more.
6.
Please put the cover on the cables, the cover must be wear-resistant, heat-resistant, water-proof,
grease-proof, in case of short circuit and open circuit.
7.
Please install a 10A fuse box near the battery output positive polar for fear of the short circuit will damage
the power supply.
