57
APPENDIX 3
Firmware Upgrade
First, upgrade the
Buddy BX1
main unit.
Second, install new PC viewer software on your PC and then initialize the
SD card using new PC viewer software.
1. Preparing Firmware
Make [program] folder at SD root folder as below
Copy “SVC100_X.X.X.bin” file in to the SD card [program] folder.
[NOTE] To get the upgraded firmware, please contact your local distributor.
2. Upgrade
Buddy BX1
Series
Insert the prepared SD card to
Buddy BX1
and turn on the power.
The Blue & Red LED will be quickly blinking together during upgrading.
There willl be a continuous “Beep” sound during upgrading.
This will take around 2min 30sec.
Do not turn off the power during upgrading.
If the upgrade has failed, the “
Buddy BX1
” should
be returned to
TTI
Once the upgrading is finished, press RECORD button to check
Buddy BX1
If the
Buddy BX1
records as normal, turn the power off.
Bring the SD card to your PC and initialize the SD card. To initialize the SD
card, please see section 4 - SD Card Insert.
