Tsubaki TSB020ED, Инструкция по эксплуатации

Страница: 8 / 16

䠉㻌
7
㻌 䠉
9. Wiring diagram
(1) A Transformer may be required, depending on the voltage of Motor.
(2) Install an insulation transformer between the power line and terminal A1-A2 of the
㻌
Shock Relay when harmonic noise is included in the power on.
(3)When the Shock Relay detect the single-phase motor, pass the main
winding line.
(4)If the capacity of the operating electromagnetic coil of the electromagnetic
contactor is above 200VA during closing time or 20VA during holding time,
then drive a secondary relay output, and the open and close the
electromagnetic contactor with the contacts of the secondary relay.
(5) Confirm that Dip Switch setting is correct against Wire passes.
㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌
Wire p
㼍㼟㼟㼑㼟㻌 㻰㼕㼜㻌㻿㼣㼕㼠㼏㼔㻌㻿㼑㼠㼠㼕㼚㼓㻌
㸯 㻌 㹒㸯 㻌
㸰 㻌 㹒㸰 㻌
Wire passes:2 times
CB
㸸
Circuit breaker
OCR
㸸
Overcurrent relay
F
㸸
Fuse
MC
㸸
Magnetic contactor
TR
㸸
Transformer