TST-770 WSD Full Line Manual-RevA
© 2021 Truck System Technologies and Pressure Systems International Inc. All Rights Reserved Worldwide.
(770) 889-9102 M-F 9-8pm, Sat 9-2pm EST
Page 8
UNDERSTANDING YOUR TIRE ALERTS
Power Unit/Trailer
Main Screen
1. Switches to each programmed tire position
every 5 seconds.
2. Displays repeater icon when receiving
repeater signal.
High Pressure Alert
Example:
High Pressure threshold is 125 PSI.
1.
Tire position will start flashing red.
2.
High Pressure indicator and icon will flash,
once every second.
3. Audible alert will sound.
Low Pressure Alert
Example:
Low Pressure threshold is 90 PSI.
1.
Tire position will start flashing red.
2.
Low Pressure indicator and icon will flash,
once every second.
3. Audible alert will sound.
When there is an alert, the tire position will change from yellow to red, will display the
corresponding alert with icons, audible alarm will sound (beep) and LED will flash red.
When you silence the alert by touching the screen, The alert will not sound again as the
unit cycles back to the alert tire. The alert text continues to flash and the tire remains red.
LED stays on as long as the alert is active.
If you leave the alert active it remains on the same alert tire for 10 seconds before
resuming the monitoring cycle. Display does not cycle through other tires until you silence
the alert.
After 10 seconds if alert has not been silenced display will continue to visually cycle
through the rest of the programmed tires, keeping the alert tire in red.
Note:
During active audible and visual alerts, all other active tires are being monitored.
High Temperature Alert
Example:
High Temperature threshold is 158º F.
1.
Tire position will start flashing red.
2. High Temperature indicator and icon will
flash, once every second.
3. Audible alert will sound.
Back To
