TST-770 WSD Full Line Manual-RevA
© 2021 Truck System Technologies and Pressure Systems International Inc. All Rights Reserved Worldwide.
(770) 889-9102 M-F 9-8pm, Sat 9-2pm EST
Page 5
DISPLAY CONTROLS AND INFORMATION
DISPLAY INSTALLATION AND CHARGING
The provided magnetic mount with suction cup base can be used on the windshield, side
window or directly on smooth, nonporous surfaces. Additional magnetic mounts can also
be used with the magnetic base plate on the backside of the display.
To charge the display’s non-replaceable, internal lithium battery, plug the USB power
cord in the provided 12v power adapter and then into the vehicles 12v power port. Plug
the USB-C end of the power cord into the side of the display. The
icon indicates
you should charge display, while
,
,
and
, indicate battery levels.
When the battery is fully charged the
icon goes away.
Note:
Displays with date codes earlier than 3321 will remain powered on regardless of
power switch selection while connected to the USB-C charging cable. Date codes of
3321 and later will power down when the off position is selected during charging.
Do not keep a fully charged display plugged in constantly.
Display ICONS
On
Off
Power
12v USB-C
Charging
Port
Tire Icon
(not yet coded)
Tire Programmed
(Tire Swap Location screen)
Tire Normal
(after coded)
Tire Alert
(after coded)
ºF / ºC
Temperature Unit
PSI/BAR
Pressure Unit
Pressure Warning
Temperature Warning
Sensor Low Battery
Repeater Signal
Trailer Icon
(Trailer 1 example)
LCD Color
Touchscreen
Display
Antenna
Red LED alert light
Sensor pairing area
Scan QR Code for
online support and
documentation
Display part number
and revision code
Display production
4-digit date code
(needed for warranty
registration)
Magnetic base
mount plate
Back To
