TST-770 WSD Full Line Manual-RevA
© 2021 Truck System Technologies and Pressure Systems International Inc. All Rights Reserved Worldwide.
(770) 889-9102 M-F 9-8pm, Sat 9-2pm EST
Page 13
MANUAL HIGH/LOW PRESSURE ALERT SETTINGS
Manual Input High/Low Pressure Alert Value Screen
Manual Input High/Low Pressure Alert Value Screen
Settings Menu Screen 1
Trailer 1 Cold Pressure Screen (Example)
Power Unit or Trailer Selection Screen
Touch
to enter the
Manual Input High/Low Pressure Alert
Value
screen.
NOTE
: LOW SETTING
MUST
BE ADJUSTED PRIOR TO HIGH SETTING.
To change
Pressure Alert Value
, touch the box that corresponds to the axle you would
like to change (
1, 2, 3
or
S
pare).
Note: High Pressure Alert
defaults are set at 25% above Cold Tire Pressure setting and
Low Pressure Alert
will be set at 10% below Cold Tire Pressure setting.
To manually adjust
High and Low Pressure
Alert
values, touch to enter into
Pressure Alert Settings
. Touch
,
,
,
,
or
to enter respective
Cold Pressure
screen.
Example:
Touch
.
This will bring up the
Keyboard Input Screen
. Enter your preferred
Low Pressure
Alert Value
. Touch
to exit
Keyboard Input Screen
and repeat steps for remaining
Pressure Alert Value
for this axle and then repeat for the remaining axles and spares.
Touch
again to exit
Manual Input High/Low Pressure Alert Value
screen. To
save your input, touch
Exit and Save
. To cancel, touch
Exit without Saving
. Selection
returns you to the Power Unit/Trailer
Main Screen
.
Keyboard Input Screen
NEW VALUE
Back To
