TSI Instruments SUREFLOW 8635-M Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 49

TSI Instruments SUREFLOW 8635-M Скачать руководство пользователя страница 18

12

Part Two

Menu and Menu Items

The SureFlow monitor is a very versatile device which can be configured to meet your
specific application. This section describes all of the menu items available to program
and change (except diagnostics menu). Changing any item is accomplished by using the
keypad, or if communications are installed through the RS-485 Communications port. If
you are unfamiliar with the keystroke procedure please see

Software Programming

for a

detailed explanation. This section provides the following information:



Complete list of menu and all menu items.



Gives the menu or programming name.



Defines each menu item’s function; what it does, how it does it, etc.



Gives the range of values that can be programmed.



Gives default item value (how it shipped from factory).

The menus covered in this section are divided into groups of related items to ease
programming. As an example all calibration items are in one menu, alarm information in
another, etc. The manual follows the menus as programmed in the controller. The menu
items are always grouped by menu and then listed in menu item order, not alphabetical
order. Figure 5 shows a chart of all the Model 8635-M monitor menu items.

«
...
16
17
18
19
20
...
»

Содержание SUREFLOW 8635-M


















































Отзывы:

Нет отзывов